Sportswear Printing Methods: 4 Options Compared

Sportswear is decorated in four main ways: sublimation for all-over color on polyester, screen printing for simple designs in volume, heat transfer for small logos and short runs, and embroidery for premium badges.

4 decoration methods From $0.50 per piece Free design mockup

The four methods at a glance

MethodHow it worksBest forLimitsSurcharge per piece
SublimationDye is turned to gas by heat and absorbed into polyester fibersAll-over designs, many colors, names and numbersNeeds light-colored polyester; no white ink$1.50
Screen printInk is pressed through a mesh stencil, one screen per colorOne- to three-color logos, cotton blends, big runsEach color needs its own screen; gradients are hard$0.80
Heat transferA printed or cut film is bonded to the fabric with a heat pressSmall logos, short runs, simple designsSits on the surface; large areas feel stiff$0.50
EmbroideryThread is stitched into the garment by machineCrests, badges, logos on thick fabricsNo fine detail or gradients; unsuited to thin stretch knits$2.00

The surcharge is added to the garment's base price in a Vofit quote. Design work is free whichever method you choose, and methods can be combined on one garment.

Sublimation printing

The artwork is printed in special inks onto transfer paper, then pressed against the fabric at high temperature. The ink becomes a gas, enters the polyester fiber and solidifies there. In cut-and-sew production each panel is printed before sewing, so color runs seam to seam.

Strengths

  • No limit on colors, shading or pattern complexity at the same price.
  • Nothing to feel on the surface, so breathability and stretch are unchanged.
  • The design cannot crack or peel, because there is no ink layer.
  • Every piece can differ, which makes rosters with individual names and numbers straightforward.

Weaknesses

  • Only works properly on polyester-rich fabric with a white or pale base.
  • The fabric color itself is printed, so exact shade matching should be confirmed on a sample.
  • At $1.50 per piece it costs more than a single small logo by transfer.

It is the standard method for team jerseys, cycling kit and rowing suits.

Screen printing

A stencil is made on a fine mesh for each color in the design. Ink is pulled across the mesh with a squeegee and passes through the open areas onto the garment, then is cured with heat.

Strengths

  • Bold, opaque color, including on dark garments.
  • Works on cotton, cotton-poly and polyester alike.
  • Economical for repeat prints of one design once the screens exist.

Weaknesses

  • Preparation is the same for 50 pieces or 5,000, so it favors volume.
  • Photographs and smooth gradients do not reproduce well.
  • A heavy print leaves a noticeable layer that reduces breathability over a large area.
  • Every piece gets an identical print; personalization needs a second method.

Typical uses are event t-shirts, activewear tees and running shirts with a chest logo.

Heat transfer

The design is produced on a carrier film, either digitally printed or cut from colored vinyl, then positioned on the finished garment and bonded with a heat press.

Strengths

  • Lowest surcharge of the four at $0.50 per piece.
  • Little preparation, so it suits a 50-pc run or a late addition.
  • Sharp edges on small logos, size marks and tagless neck prints.
  • Can be applied to stretch fabrics using elastic films.

Weaknesses

  • The film sits on the surface and can crack or lift after long use and hot washing.
  • Large solid areas feel rubbery and trap heat.
  • Less suited to an all-over look.

It is offered on items such as yoga leggings, activewear shorts and event tank tops, usually for a logo at hip, chest or back neck.

Embroidery

The logo is converted into a stitch file, and a multi-head machine sews it into the garment with colored thread.

Strengths

  • Raised, textured finish that reads as premium.
  • Very durable; thread outlasts most printed finishes.
  • Works on fabrics that sublimation cannot color, such as cotton-poly fleece.

Weaknesses

  • Highest surcharge at $2.00 per piece.
  • Small text and thin lines fill in; gradients are not possible.
  • Adds weight and stiffness, and can pucker light, stretchy fabric.
  • The backing can rub against skin on tight garments.

At Vofit embroidery is available on thicker styles: hoodies, polos, tracksuits, yoga jackets, and baseball, rugby and hockey jerseys, often as a crest over a sublimated body.

How to choose by quantity, design and fabric

By design

  • Full-garment pattern, gradient, photo or more than three colors: sublimation.
  • One to three flat colors in one position: screen print.
  • A small logo or wordmark: heat transfer.
  • A club crest or brand badge on outerwear: embroidery.

By quantity

  • 30–99 pcs: sublimation or heat transfer, since neither depends on volume to be efficient.
  • 100 pcs and above with a simple design: screen print becomes attractive.
  • Individual names or numbers at any quantity: sublimation.

By fabric

  • Polyester and polyester-spandex: any method; sublimation gives the most freedom.
  • Cotton and cotton-poly: screen print, heat transfer or embroidery.
  • Fleece, French terry, pique: embroidery or screen print.

The fabric guide has a full compatibility table. If you are unsure, send the artwork through the quote form: the mockup returned within 24 hours will show the recommended method, and a $30–$50 sample lets you judge the result before bulk.

Frequently Asked Questions

What printing methods are used on sportswear?

The four main methods are sublimation, screen printing, heat transfer and embroidery. Sublimation dyes the design into polyester for all-over color.

Screen printing lays ink on the surface for simple logos. Heat transfer bonds a film to the fabric for small runs.

Embroidery stitches the design in thread.

Which printing method lasts longest on sportswear?

Sublimation and embroidery are the most durable. Sublimated color is inside the polyester fiber, so there is no surface layer to crack or peel.

Embroidery thread is also long-lasting. Screen prints and heat transfers sit on top of the fabric and can show wear after extended use and repeated hot washing.

How much does each printing method add to the price?

In Vofit quotes the surcharge per piece is $0.50 for heat transfer, $0.80 for screen print, $1.50 for full-color sublimation and $2.00 for embroidery. The amount is added to the garment base price after the quantity tier is applied.

Design and mockup are free for every method.

Can sublimation be used on cotton or dark fabric?

No. Sublimation dye only bonds with polyester, and it is transparent, so it needs a white or light base to show true color.

Dark garments are made by printing the dark color onto white polyester. For cotton or cotton-rich blends, screen printing, heat transfer or embroidery are the usual choices.

What is the best printing method for a small order?

For 30–99 pieces, sublimation suits full designs and heat transfer suits a simple logo, because neither requires costly per-color preparation. Sublimation also allows a different name and number on every piece.

Screen printing is more economical once a simple design is repeated across larger quantities.

Can two printing methods be combined on one garment?

Yes. Common combinations are a sublimated jersey with an embroidered crest, or a screen-printed chest logo with a heat-transfer neck label.

Each method must suit the fabric: embroidery needs a stable, thicker cloth, and sublimation needs polyester. Each method used adds its own surcharge per piece.

Ready to start your order?

Tell us what you need and get a free quote within 12 hours.

We respond within 12 hours. Your information is confidential.