Fabrics 2026-11-22 · 8 min read

Sportswear Fabric Guide: Polyester, Nylon, Spandex and GSM

Compare polyester, nylon and spandex blends for sportswear, with GSM ranges from 120 to 320 by garment type, key fabric tests and how fabric changes price.

VPT

Vofit Production Team

Vofit Custom Sportswear

The Short Answer

Most sportswear is made from three fibres: polyester for moisture management and print quality, nylon for softness and abrasion resistance, and spandex (elastane, Lycra) for stretch. Loose-fitting jerseys and tees use 100% polyester knits at 120–180 GSM, while leggings, bras and other compression pieces use polyester-spandex 90/10 or nylon-spandex 80/20 at roughly 220–280 GSM. At Vofit, polyester-spandex 90/10 is the standard fabric level at no surcharge, nylon-spandex 80/20 adds $0.50 per piece, and high-end fabrics such as bamboo charcoal add $1.20 per piece.

The Three Fibres and What Each One Does

PropertyPolyesterNylon (polyamide)Spandex (elastane)
Moisture absorptionVery low (about 0.4%)Low (about 4%)Very low
Drying speedFastestFastNot used alone
Hand feelSmooth to slightly crispSoft, cool, "buttery"Adds stretch, not feel
Abrasion resistanceGoodExcellentPoor on its own
StretchLow unless blended or mechanically knittedLow unless blended400–600% elongation
Sublimation printingExcellentLimitedNot applicable

Polyester absorbs almost no water, so sweat spreads and evaporates instead of soaking in, and it is the fibre sublimation ink bonds with. Nylon costs more but feels softer and resists rubbing better, which is why it dominates premium leggings and bras. Spandex is never used alone: 5–25% is knitted in for stretch and recovery, and more of it means more compression but a heavier, warmer, dearer fabric.

Common Blends and Knit Structures

Stretch blends

  • Polyester-spandex 90/10 — the standard four-way stretch fabric for leggings, shorts, rowing suits and base layers. Prints well, dries fast and costs the least.
  • Nylon-spandex 80/20 — the premium choice for yoga leggings and sports bras. Strong compression and a soft, matte hand feel.
  • Polyester-spandex 88/12 — a middle ground with slightly more stretch than 90/10, common in compression tights.
  • Polyester-spandex 95/5 — a T-shirt weight fabric with a little comfort stretch, used for gym and running tees rather than tight garments.

Polyester knits without spandex

  • Mesh — an open-hole knit with the highest airflow. Used for basketball jerseys, singlets, side panels and linings.
  • Interlock — a smooth double knit that looks the same on both faces, with good opacity and a clean print surface. Standard for soccer and cricket jerseys.
  • Birdseye — a fine textured knit with tiny pores on the back that pull sweat away from the skin.
  • Pique — the textured knit used in polo shirts, baseball and rugby jerseys.
  • Dazzle — a shiny, tightly knitted fabric used on basketball and hockey jerseys.

Warm and casual fabrics

  • French terry — a knit with a smooth face and loops on the back, usually 240–320 GSM. Used for hoodies, joggers and yoga jackets.
  • Fleece — French terry with the loops brushed into a soft nap, usually around 280 GSM and up, for hoodies, tracksuits and warm-up layers.

For a longer look at stretch fabrics specifically, see our post on how to choose yoga leggings fabric.

GSM Ranges by Garment Type

GSM means grams per square metre. It is the weight of the fabric, not a quality grade. Lower GSM is lighter and more breathable; higher GSM is more opaque, durable and warm.

GarmentTypical fabricTypical GSM range
Running singletPolyester singlet mesh110–130
Running or training T-shirt100% polyester interlock or birdseye130–160
Soccer jerseyPolyester interlock or birdseye130–160
Cycling jerseyPolyester waffle or birdseye130–150
Basketball jerseyPolyester mesh or dazzle160–200
Polo shirt, baseball jerseyPolyester pique180–200
Rugby and hockey jerseyHeavy pique, mesh or dazzle220–250
Leggings, sports braNylon-spandex or polyester-spandex220–280
Cycling shortsLycra-spandex 80/20200–250
Hoodie, sweatshirtFrench terry240–320
Fleece hoodie, tracksuitPolyester fleece280–340

These match what Vofit uses as defaults: 140 GSM interlock for a custom soccer jersey, 160 GSM mesh for basketball, 220 GSM pique for rugby and 280 GSM fleece for hoodies. A tolerance of about ±5% on GSM is normal between fabric lots.

Performance Properties Worth Asking About

Moisture wicking

Wicking pulls sweat away from skin and spreads it out to evaporate. It comes from two sources: the fibre and knit structure (polyester birdseye wicks naturally) and a hydrophilic finish applied after dyeing. A finish can wash out over 20–30 washes, while structural wicking is permanent. Ask which one you are getting.

UPF sun protection

UPF measures how much ultraviolet radiation passes through the fabric. UPF 30 blocks about 96.7% and UPF 50+ blocks at least 98%. Tight knits, heavier GSM, darker colours and polyester all raise UPF; stretching the fabric and getting it wet lower it. Before printing "UPF 50+" on a fishing shirt, request a lab test report for the actual fabric and colour.

Pilling

Pilling is the formation of small fibre balls where fabric rubs: inner thighs, underarms, under a backpack strap. It is graded from 1 (severe) to 5 (none) using tests such as Martindale. Grade 3–4 or better is a reasonable requirement for leggings and shorts. Tighter knits and nylon blends pill less.

Opacity

Leggings must stay opaque when stretched. Opacity depends on GSM, knit density, colour and yarn type, so a light-coloured 200 GSM fabric may show through where a black one does not. Do a squat test on the sample. Sublimation-printed stretch fabric starts from a white base, so a dark print can show white "grin-through" when stretched hard; a denser base fabric reduces it.

Recycled polyester

Recycled polyester (rPET) is made mostly from post-consumer plastic bottles and performs close to virgin polyester in wicking, strength and sublimation quality. It usually costs somewhat more. If you intend to market a garment as recycled, ask the supplier for chain-of-custody documentation and confirm availability for your style first.

Which Fabric for Which Sport

  • Soccer, cricket, running: 130–160 GSM polyester interlock or birdseye. Light, fast-drying and ideal for full sublimation.
  • Basketball: 160 GSM mesh for airflow, or 200 GSM dazzle for a classic shiny look.
  • Rugby and hockey: 220–250 GSM pique, mesh or dazzle that survives contact.
  • Cycling: 130–140 GSM waffle or birdseye for the jersey body, mesh for side panels, and Lycra-spandex 80/20 for shorts.
  • Yoga and studio training: nylon-spandex 80/20 for soft, high-compression custom yoga leggings; polyester-spandex 90/10 when you want all-over prints or a lower price.
  • Rowing: polyester-spandex 90/10 or Lycra-spandex 80/20 all-in-ones that stay tight when wet.
  • Fishing and outdoor: 160 GSM micro polyester with long sleeves, chosen for sun coverage and quick drying.

How Fabric Choice Changes Price

Fabric is usually the largest single cost in a garment. Vofit prices fabric in three levels, added per piece on top of the base price:

Fabric levelExampleSurcharge per piece
StandardPolyester-spandex 90/10+$0
PremiumNylon-spandex 80/20+$0.50
High-endBamboo charcoal and similar+$1.20

On an order of 200 leggings, moving from standard to premium fabric adds $100 in total; moving to high-end adds $240. For comparison, Vofit's custom yoga leggings run $4.5–8 per piece at 100+ pcs, so the fabric level can shift the unit price by 10–25%.

GSM and garment size matter too: fabric is bought by weight, so a 280 GSM fleece hoodie uses several times the material of a 120 GSM singlet. Print method is linked as well, because sublimation needs a high-polyester fabric; our printing methods page explains the pairing.

Quantity still matters more than fabric: at Vofit, 500–999 pcs is 15% below the 100–499 pcs base price and 1000+ pcs is 25% below, which outweighs a $0.50 fabric upgrade on most styles.

Frequently Asked Questions

What GSM is best for sportswear?

There is no single best GSM. Jerseys and training tees work best at 130–160 GSM, basketball and polo fabrics at 160–200 GSM, leggings and bras at 220–280 GSM, and hoodies at 240–320 GSM. Choose by garment type and climate rather than assuming heavier means better.

Is nylon-spandex better than polyester-spandex for leggings?

Nylon-spandex 80/20 feels softer, has stronger compression and resists pilling better, which suits premium yoga and studio lines. Polyester-spandex 90/10 costs less, dries slightly faster and takes sublimation prints far better. Many brands use nylon for solid colours and polyester for printed styles.

Can sublimation be used on any sportswear fabric?

Sublimation works on polyester and high-polyester blends with a white or very light base. It does not bond with cotton, and results on nylon are limited in brightness and wash fastness. For cotton-rich fabrics, screen printing, heat transfer or embroidery are the usual options.

How much spandex should leggings have?

Between 10% and 25%. Around 10–12% gives comfortable four-way stretch for general training and running, while 18–25% gives the firm, sculpting compression expected of yoga and studio leggings. Above 25% the fabric becomes heavy, warm and slow to dry.

How do I check fabric quality before ordering in bulk?

Request fabric swatches or a finished sample in the exact fabric and weight you intend to order. Check hand feel, stretch and recovery, opacity under stretch, and colour after one wash. Vofit makes samples in 5–7 days, and the fabric guide lists the options to choose from.

Get a Fabric Recommendation With Your Quote

Tell us the sport, the garment and your target price, and Vofit will suggest a fabric and GSM that fits. Use the quote form and instant price calculator to see how each fabric level changes your unit price before you commit.

Ready to Start Your Custom Sportswear Order?

Get a free quote with no obligation. We respond within 12 hours.

Get Free Quote