Quality 2026-11-22 · 8 min read

Custom Sportswear Samples: Process, Cost and Timeline Explained

The five sportswear sample types, what each proves, a 5-7 day sample timeline, normal revision rounds, a checking checklist and how sampling affects bulk.

VPT

Vofit Production Team

Vofit Custom Sportswear

The Short Answer

Custom sportswear sampling normally involves up to five sample types: fabric swatch, print strike-off, fit sample, pre-production sample and size set. At Vofit a sample takes 5–7 days to make, plus typically 3–7 days for express delivery, and one to two revision rounds are normal. Sample fees vary by style and are often credited against the bulk order; the quote will state the exact fee. Once the sample is approved, bulk production takes 7–25 days depending on quantity.

Why Sampling Exists

A sample is the cheapest place to find a mistake. Changing a neckline on one garment costs a few days; discovering the same problem on 500 finished pieces costs the order. An approved sample is also the physical standard the bulk order must match.

Not every order needs every sample type. A club reordering last season's jersey in a new colour may need only a digital mock-up and a strike-off. A new brand launching leggings should expect the full sequence.

The Five Sample Types and What Each Proves

Sample typeWhat it isWhat it provesTypical timing
Fabric swatchSmall cuttings or a swatch card of candidate fabricsHand feel, weight, stretch, opacity, base colourA few days plus shipping
Strike-off / print testYour artwork printed on the actual fabric, usually a panel or sectionColour accuracy, sharpness, print scale2–4 days
Fit sampleA sewn garment in one size, sometimes in available fabric or colourPattern, measurements, construction, comfort5–7 days
Pre-production sample (PPS)A complete garment in the final fabric, colour, print, trims and labelsEverything; this is the bulk standard5–7 days
Size setOne garment in each size, or in the smallest, middle and largestGrading between sizes5–10 days

Fabric swatch

Swatches answer what photographs cannot: hand feel, stretch, recovery and opacity. Ask for swatches when you are choosing between options, for example polyester-spandex 90/10 against nylon-spandex 80/20 for leggings. The fabric guide shows which fabrics apply to each product.

Strike-off or print test

A strike-off is a test print of your artwork on the real fabric. It matters most for sublimation, where a navy on screen can come out purple-tinted on polyester. Check it in daylight against your Pantone reference. Our comparison of sublimation vs screen printing for teamwear explains how the methods differ.

Fit sample

The fit sample tests the pattern. It may use a substitute colour or placeholder print. Try it on a person of the intended size and move in it: squat in leggings, reach overhead in a jersey, sit in a riding position in cycling shorts.

Pre-production sample

The PPS is the final garment: correct fabric, colour, print, trims, labels and packaging. It is what you sign off, and it becomes the reference for quality control. For simple styles, the fit sample and PPS are often combined into one fully finished sample.

Size set

A size set confirms that the garment has been graded correctly across the range. Brands selling across six or more sizes should ask for at least the smallest, middle and largest size.

Sample Cost

There are three cost elements to expect from any manufacturer:

  • Sample fee. A one-off garment costs more to make than a bulk unit, because pattern making, a single print run and machine set-up are spread over one piece instead of hundreds. Fees vary by style.
  • Set-up charges. Screens, embroidery digitising or custom-dyed fabric may carry separate charges, depending on the supplier.
  • Shipping. Express courier for a small parcel, paid by the buyer in most cases.

Sample fees are often credited against the bulk order once it is confirmed, so the net cost can be only the freight. Vofit states the sample fee and any credit terms in the quote for your specific style, so ask for it in writing before you approve the sample.

Typical Sampling Timeline

Using Vofit's sample time of 5–7 days and express shipping of typically 3–7 days door to door, a realistic schedule looks like this.

StageDuration
Brief, mock-up and spec confirmation1–3 days, depending on how complete your information is
Sample production5–7 days
Express delivery to you3–7 days
Your review and feedback1–3 days
Revision sample, if needed5–7 days plus 3–7 days delivery
Bulk production after approval7–25 days by quantity

With one sample round, expect roughly 2–3 weeks from confirmed design to an approved sample in your hands. Each extra round adds 8–14 days. The biggest variable is the brief: vector artwork and a size chart with tolerances remove most first-round errors.

How Many Revision Rounds Are Normal

  • One round is common for ODM styles and reorders, where the pattern is already proven and only colours and artwork change.
  • Two rounds is normal for a new OEM design: the first sample exposes fit or colour issues, the second confirms the fixes.
  • Three or more usually signals an incomplete spec or changing requirements rather than a factory problem.

Small corrections do not always need a new physical sample. A 1 cm change to sleeve length or a logo moved 2 cm can often be approved from photos and measurements. Fabric, fit and colour changes should be seen in person.

To keep rounds down, put all feedback in one message, give numbers ("reduce hem width by 2 cm in size M") rather than impressions, and attach marked-up photos.

What to Check on a Sample

  1. Measurements. Lay the garment flat and measure every point on the size chart. Compare against the spec and tolerance, typically ±1 cm on body measurements.
  2. Fit on body. Try it on someone of the intended size and move as the sport requires.
  3. Fabric. Confirm composition and weight, stretch and recovery, and opacity when stretched.
  4. Colour. Compare body, trims and print against Pantone references in daylight.
  5. Print or embroidery. Check sharpness, position, size, alignment across seams and any cracking when stretched.
  6. Construction. Look for even seams, no skipped stitches, secure bartacks at stress points and trimmed threads.
  7. Trims. Test zips, drawcords, elastic, grippers and pads.
  8. Labels. Check brand label, size, fibre content, care symbols and origin for your market's rules.
  9. Wash test. Wash and dry once or twice following the care label, then re-measure. Look for shrinkage, colour bleed, print fading and pilling.
  10. Packaging. Check folding, polybag, stickers and barcodes if the sample is a PPS.

Approving the Sample for Bulk

Approval should be explicit and in writing. A good approval message names the sample, lists any remaining corrections ("approved with comments"), and confirms the final quantity per size and colour. Keep the approved sample as your reference.

Before approving, confirm three things alongside the garment itself: the bulk price for your quantity tier, the production lead time, and the shipping method. After approval, changes to fabric, colour or artwork generally mean new materials and a new timeline.

How Sampling Connects to Bulk Lead Times

Bulk lead time starts when the sample is approved and the order is confirmed, not when you first enquire. Vofit's production lead times by quantity are:

QuantityProduction lead timePrice vs 100–499 pcs base
30–49 pcs10–15 days+30%
50–99 pcs10–15 days+20%
100–499 pcs7–12 daysBase
500–999 pcs12–18 days-15%
1000+ pcs15–25 days-25%

So for 200 jerseys with one sample round, a workable plan is about 2–3 weeks for sampling, 7–12 days for production and 3–7 days for express delivery: roughly 5–6 weeks in total. If your deadline is fixed, count backwards from it and add one revision round as a buffer. Our custom sportswear MOQ guide covers how quantity affects price in more detail.

Frequently Asked Questions

How long does a custom sportswear sample take?

Vofit makes samples in 5–7 days, and express delivery typically adds 3–7 days door to door. Allow about 2–3 weeks from a confirmed design to an approved sample, including your own review time. Each revision round adds roughly 8–14 days.

How much does a sportswear sample cost?

Sample fees vary by style, fabric and decoration method, and are higher per piece than bulk prices because set-up is spread over a single garment. Many manufacturers credit the fee against the bulk order. The quote should state the sample fee, shipping cost and credit terms.

Can I skip the sample and go straight to bulk?

It is possible on repeat orders of an unchanged style, but risky on a first order. Without a physical sample you have no agreed standard for fit, colour or quality. At minimum, approve a digital mock-up and a strike-off or photo of the first finished piece.

How many sample revisions should I expect?

One round is typical for ODM styles and reorders, and two rounds is normal for a new design. If you reach a third round, the specification is probably incomplete, and it is worth rewriting the brief before continuing.

Start With a Sample Quote

Send your design, quantity and deadline through the quote form, and Vofit will reply with the unit price, the sample fee for your style and a timeline from sample to delivery. If you are ordering small quantities for an online shop, the small seller program is a good place to begin.

Ready to Start Your Custom Sportswear Order?

Get a free quote with no obligation. We respond within 12 hours.

Get Free Quote